CC1312R1_Solar_Power_Asset_Tracker_example_gcc

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #llm #golang #machine-learning #rust #linux #nodejs #windows #pytorch #ios #mcp

CC1312R1_Solar_Power_Asset_Tracker_example_gcc

(★ 9)

CC1312R1 Sub-G Solar power asset tracker

CC1312R1_Solar_Power_Asset_Tracker_example_gcc 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Sub-G Solar Power Asset Tracker
<div align="center">
<img src="./asset/main_image.png">
</div>
 
<table>
<tr>
<tr align="center">
 <td>TOP</td>
 <td>BOTTOM</td>
</tr>
 <tr align="center">
 <td><img src="./asset/Asset_tracker_PCB_TOP_FLAT.jpeg"></td>
 <td><img src="./asset/Asset_tracker_PCB_BTM_FLAT.jpeg"></td>
 </tr>
</table>

-------------------------

Sub-G Solar Power Asset Tracker uses AxDen's Aggregator Platform to collect key information required for asset tracking such as temperature, acceleration, and GPS location.
 
This is an example that provides a quick test for various service scenarios that require long-distance communication of 1Km or more or 2G/3G/4G communication.
 
 
Related hardware kits can be purchased from the Naver Smart Store.
 
[Purchase Link : naver smart store](https://smartstore.naver.com/axden)
 
 
You can purchase it by contacting sales@axden.io or [www.axden.io](http://www.axden.io/)

-------------------------

### Key features and functions.

MCU | Description
:-------------------------:|:-------------------------:
CC1312R1 | TI ROTS, EasyLink

*\* Low-power technology with TI Sensor Controller is available in the Production version family.*

The Sub-G Solar Power Asset Tracker example collects key information necessary for asset tracking, such as temperature, acceleration, and GPS location, and charges the battery using solar charging.
 
Transmit the collected information to Sub-G or 2G/3G/4G communication.
 
 
Interwork with AXDEN Aggregator Platform to check sensor information on the web and mobile whitout building infrastructure such as server and DB
 
 
Learn Edge AI using sensor information stored in the AXDEN Aggregator Platform.

-------------------------

### How to check using the terminal.

If you have an [AA-MB-05](http://www.axden.io/module_products/) board, you can check the communication through the terminal.

Connect the AA-MB-05 board to the PC.

-------------------------

### How to check using the server.

If you have a TCP server, you can check it through the server.
 
In this example, the IP and Port number of the example server provided by AXDEN are temprarily set.
<table>
 <tr align="center">
 <td>RF RX Sub-G example terminal</td>
 <td>RF RX 2G/3G/4G Server example log</td>
 </tr>
 <tr align="center">
 <td><img src="./asset/RX_Sub_G.png"></td>
 <td><img src="./asset/Server_Log.png"></td>
 </tr>
</table>

-------------------------

### How to check the solar battery charge.

As shown in the image below, you can check the amount of battery charging current using sunlight using a multimeter.

-------------------------

### How to check using AXDEN Aggregator Platform

Register the MAC Address of the device after signing up as a member on the AXDEN Aggregator Platform website.

Enter COMPANY ID nad DEVCIE ID provided on the AXDEN Aggregator Platform website into COMPANY_ID and DEVCIE_ID in the Protocol.h header file.

[AXDEN Aggregator Platfrom](http://project.axden.io/)

`#define COMPANY_ID 0`

`#define DEVICE_TYPE 0`

Complie and flash.
 
 
Check whether COMPANY_ID and DEVICE_ID are applied correctly through the terminal
 
 
Sensor information can be found on the Web or Mobile as shown in the image below
 
 
<img src="./asset/GPS_Log.png">

-------------------------

### How to change the server

IP and Port can be changed in the `set_bg96_socket_connect` function of the `bg96_tcp_data_upload` function of the bg96.c file.

IP and Port can be changed in the `sara_u2_tcp_data_upload` function of the `set_sara_socket_connect` function of the sara_u2.c file

-------------------------

### How th change the GPS and cellular communication module

Module replacement is possible in the Protocol.h file.
 
```
#define BG96
#define SARA_U2

#define QUECTEL_GPS
#define UBLOX_GPS
````
When BG95/96 is used, -> #define SARA_U2 / Annotated
 
Same as the image below.Set UART Pin in syscfg file
 
<img src="./asset/BG96_UART_Setup.png">
 
 
When SARA-U2 in used, -> #define BG96 / Annotated
 
Same as the image below.Set UART Pin in syscfg file
 
<img src="./asset/SARA_U2_UART_Setup.png">
 
 
When L70 in used, -> #define UBLOX_GPS / Annotated
 
 
When NEO-M8N in used -> #define QUECTEL_GPS / Annotated

### Hardware Pinmap
You can check in the board_define.h header file.

----

### [Firmware settings and compilation](https://github.com/AxDen-Dev/CC1312R1_Ping_Pong_example_gcc)

----

### [Firmware flash](https://github.com/AxDen-Dev/CC1312R1_Ping_Pong_example_gcc)

CC1312R1_Solar_Power_Asset_Tracker_example_gcc

CC1312R1_Solar_Power_Asset_Tracker_example_gcc 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

CC1312R1_Solar_Power_Asset_Tracker_example_gcc

CC1312R1_Solar_Power_Asset_Tracker_example_gcc 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README