Miasma_1.03_Revised

KO | EN

gitlite — search

#hacktoberfest #react #ai #typescript #golang #android #linux #macos #nodejs #java #kubernetes #pytorch #security #ios

Miasma_1.03_Revised

(★ 23)

No description available.

Miasma_1.03_Revised 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Miasma_1.03_Revised

***Note: use the BOM included in this repository.*** Some of the components have been relabelled in this revision so the BOM on SinPhi's website is no longer current.

The changes from version 1.03 are:

1) Updated the footprints and symbols to ones included in KiCAD 5.1.5, or otherwise included the auxillary libraries in the repository.

2) Made the 4QX output no longer inverted and added a jumper pin on the back that allows you to switch between (non-inverted) summing and 4QX modes.

3) Added diodes and jumper pins between the cycle gate input and trigger switch for each side. This allows you to choose whether applying a gate to the cycle input will cause it to start cycling automatically (jumper on) or require a trigger to start cycling (jumper off).

4) Fixed the EOC2 output from not being grounded.

5) Small tweaks such as adjusting track spacing, etc.

To do: the resistor in the feedback loop of the 4QX output amp (R67) should be shorted (solder bridge), not 220k. The purpose is to make this output stage a unity gain buffer instead of an amplifier; the 220k will cause the output to clip before the signal peak is reached. If you aren't using the 4QX feature then this is irrelevant.

# Acknowledgements

Original Miasma board by Sin Phi http://www.sinphi.com/synths/miasma/miasma.html, based on the Befaco Rampage http://www.befaco.org/rampage-2/. 4QX and diode mods inspired by Mcop http://www.mcop.co.uk/diy/mods-and-stripboard-layouts/miasma-function-generator-modifications/.

Miasma_1.03_Revised

Miasma_1.03_Revised 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Miasma_1.03_Revised

Miasma_1.03_Revised 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README